Error 3000 how to turn off privacy mode

How can the "Kmode Exception Not Handled" error be resolved in Windows

The blue screen (BSOD) is a common and nerve-wracking problem for Windows users. This can cause system crashes in different ways. Particularly common blue screen error messages are e.g. nvlddmkm.sys, igdkmd64.sys and SYSTEM SERVICE EXCEPTION etc. As a rule, an error code is displayed on a blue screen, which can be used to determine what kind of hardware problem is present. Many Windows 10 users had the problem that the "Kmode Exception Not Handled" error occurred. This error also occurred with Windows 8 users. Below we present some solutions to fix the "Kmode Exeption Not Handled" error in Windows 10.

What does “Kmode Exception Not Handled” mean?

The error message “Kmode Exception Not Handled” is a system crash. Such a system crash occurs when a kernel-mode program causes an exception that cannot be identified by the error handler. Usually the code 0x0000001E is displayed and it can happen that the computer goes into a restart loop.

How can the "Kmode Exception Not Handled" error be resolved?

To fix the "Kmode Exception Not Handled" error, you can try the following:

Turn off the quick start

Run Windows Memory Diagnostics

Update device drivers

Method one: turn off the quick start

Windows quick start is a function that users can use to set their preferences when starting up the computer. This function is available for Windows 8 and Windows 10 and works in a similar way to hibernation in older Windows versions. By saving the operating system status in a retirement file, the quick start can make your computer start up even faster.

However, the quick start can also lead to a system crash if there are problems reloading the operating system kernel, drivers and the system and this is not recognized. This is why BSOD errors sometimes occur, such as the "Kmode Exception Not Handled" error. In this case it may help to switch off the quick start so that the computer can start up normally.

1. Win + R, “Control panelInsert ”and press enter;

2. Find Energy options;

3. Choose Select what should happen when you press the power button;

4. Click on Some settings are currently not available;

5. Remove the tick at Activate quick start (Recommended), then click Save Changes and close the window;

 

After making the settings, restart your computer and see if the “Kmode Exception Not Handled” error has been resolved.

Method two: run Windows memory diagnostics

The Windows memory diagnostic tool is used to check the system memory. It checks the computer's RAM for errors. During the checking process, you will be shown whether any errors have already been found.

1. Open the Windows memory diagnostics by searching for it in the Windows 10 search bar;

2. Click Restart now and check for problems (recommended).

Fix the problems found and restart Windows.

Method three: Update device drivers

To update your device drivers, you can either update them manually in the device manager or have them updated automatically with a driver update.

Update your drivers in the device manager

1. Press Win + X and select the device manager;


2. Find “Software Devices” and right click to update the drivers;

3. Click on “Automatically check for updated driver software” and wait.

Now check whether the driver is compatible with your system.

Update drivers with a driver updater

For most users it is very tedious to update drivers yourself, but a driver updater can help to update outdated drivers automatically. An example of a driver updater is the Driver Booster, which efficiently updates more than 3,000,000 device drivers and fixes driver problems.

With the Driver Booster you can update your device drivers in just two steps.

  1. Run Driver Booster and wait for the program to finish scanning;


  2. Update all drivers with just one click.

After updating the drivers, restart your computer and see if the errors have been resolved.