How to clean refrigerator coils amana

Item content:

Go to the side of the house where you will install the bamboo gutter and place the end of a tape measure against the edge of the building. Pull the tape measure all the way to the opposite end of the wall to determine the correct length for the bamboo gutter.

Place the bamboo gutter on a workbench and use the tape measure to find the area to cut. Draw a line around the outside of the bamboo gutter.

Wrap a piece of tape around the bamboo gutter at the point of the pencil line.

Mount a fine-toothed blade in a table saw and put on protective glasses. Turn on the saw.

Place the tape on the bamboo gutter just in front of the saw blade. Move the gutter towards the saw blade until it cuts into the bamboo. Slowly roll the gutter so that the blade cuts all of the tape, but not all the way through the bamboo cuts.

Rotate the Bamboo gutter back to its original position and push it through the saw blade to complete the cutting process.

Turn off the saw and remove the tape from the bamboo gutter.

Things you need

  • Tape measure
  • Masking tape
  • Table saw
  • Finely serrated saw blade
  • safety goggles

top

  • Bamboo gutter can also be cut with a fine-toothed hacksaw.

Video addition:.


Best Articles In Categories